-
AboutHebei Taylor Railway Equipment Co., Ltd. was established on May 23, 2014. It is a high-tech enterprise that produces railway equipment, sound barriers, bridge bearings, expansion joints, corrugated pipes, water stops, tunnel sealing components, and seismic isolation products. Scientific research, production and construction are integrated. Located at No.11 Industrial Street, North Industrial Base, High-tech Zone, Hengshui City, Hebei Province, with a registered capital of 109.66 million yuan.
-
ProductsAfter years of development, Hebei Taylor Railway Equipment Co., Ltd. has successively developed a variety of proprietary technologies and new products, such as "ballasted track beam expansion device", "bridge expansion device", "fast-mounted bridge expansion device for light rail", "composite friction pendulum vibration reduction and isolation bearing", "compensation self-resetting friction pendulum vibration reduction and isolation bearing", and has obtained 9 national patents. The company has innovative investment in R & D design, manufacturing, internal management and other fields, and has produced a good innovation demonstration effect.
-
ServiceThe company pays attention to the development and introduction of perfect technology, perfect technology and perfect equipment. In order to ensure the professionalism of various production, the company has purchased more than 200 sets (sets) of various professional production equipment and built professional painting facilities and experimental centers. Through independent research and development, the company has obtained a number of national patent technologies, so that the company's products maintain an important position in the same industry, and have a strong market competitiveness.
-
BlogOur company always adheres to the principle of development by quality and survival by quality, promotes the company's development to a group economy, implements brand strategy and integrity strategy; it is our pursuit to establish a corporate image, maintain the authority of trademarks, and promote the development of our company, Drive the industry to a high level and professional development, and win unanimous praise from the industry and users.
Device method for counting plate rubber bearings
Release time:
2018-08-13
On the general plate rubber bearing equipment cast-in-place beam equipment rubber bearing is more convenient. The construction procedure is as follows: the top surface of abutment pad stone shall be clean. If the bearing pad stone elevation interval is too large, can be adjusted with cement mortar. The center shall be marked on the bearing pad stone according to the planning drawing, and the center of the rubber bearing shall be consistent with the center line of the bearing pad stone during equipment, so as to ensure the bearing in place accurately.
On the general plate rubber bearing equipment cast-in-place beam equipment rubber bearing is more convenient. The construction procedure is as follows: the top surface of abutment pad stone shall be clean. If the bearing pad stone elevation interval is too large, can be adjusted with cement mortar. The center shall be marked on the bearing pad stone according to the planning drawing, and the center of the rubber bearing shall be consistent with the center line of the bearing pad stone during equipment, so as to ensure the bearing in place accurately.
When the same piece of beam needs two or four bearings, in order to facilitate leveling, a layer of cement mortar can be laid between the bearing pad stone and the bearing, so that the rubber bearing can be automatically leveled under the pressure of the bridge body. Before pouring the beam body, a supporting steel plate slightly larger than the support plane is placed on the support, the steel plate is welded with the anchor steel bar to connect with the beam body, and the supporting steel plate is regarded as a part of the pouring beam template for pouring. According to the above method, the support can be closely attached to the steel plate at the bottom of the beam and the top surface of the pad stone.
Equipment for precast beam rubber bearing: The key to good equipment for precast beam rubber bearing is to ensure that the bottom of the beam is parallel and flat on the top surface of the pad stone, so that it is closely attached to the upper and lower surfaces of the bearing, and there is no phenomenon of bias, void and uneven bearing force. The construction procedure is as follows: handle the support pad stone and make the support pad stone elevation together. The bottom surface of the precast beam in contact with the bearing shall be level and flat.
When there is honeycomb slurry and inclination, it should be tamped and leveled with cement mortar in advance. The correct location of the rubber bearing shall first make the bearing and bearing pad stone accurately in place according to the planning requirements. When the beam is erected and dropped, the longitudinal axis of the T-beam coincides with the center line of the support; the longitudinal axis of the plate beam and box beam is parallel to the center line of the support.
Key words:
Relevant Blog
Methods of bridge reinforcement
2018-08-13
Maintenance and cleaning of rubber molds
2018-08-13
Contact Us
Hotline:
+86-318-8885959
E-mail:
xiaoshoubu@hebeitaile.com
Address:
No.88, Industrial Street, North Industrial Base, Taocheng District, Hengshui City, Hebei Province
Website
Copyright © Hebei Taile Railway Equipment Co., Ltd